Build Better
and Save Money.

OUR PATENTED TECHNOLOGY WILL DRAMATICALLY INCREASE YOUR PRESSURE TOLERANCES WHILE DECREASING YOUR INSTALLATION TIME.

Build Better
and Save Money.

OUR PATENTED TECHNOLOGY WILL DRAMATICALLY INCREASE YOUR PRESSURE TOLERANCES WHILE DECREASING YOUR INSTALLATION TIME.

Faster Installation, Shorter Leadtime, Less Cost when compared to equivalent HDPE pipe.

Install in HALF the time.

20 Minutes for Fiber Flex VS HDPE 16″ DR-7 at 43 minutes

  • CFT’S PATENTED MATERIAL WRAPS THE PIPE SIGNIFICANTLY INCREASING ITS PRESSURE RATING
  • HDPE Protective Layer
Reference “Figure 1”.

Fiberflex Technology

  • Increased working pressure vs. HDPE pipe
  • Increased install speed vs. welding steel or DR 7-15 HDPE
  • The joints can be fused using standard HDPE fusion equipment
  • Reduction in pipe cost vs. steel and HDPE pipe
  • Reduced transportation cost
  • Reduction in weight leads to an easier installation
  • Slow Crack propagation properties of HDPE are maintained
Composite Fluid Transfer Pipe 3d Rendering
Figure 1
ASTM certifications

Tested tough

ASTM Standards: Tests were conducted according to ASTM standards D1599 and D2143.

FiberFlex surpasses the competition by its increased working pressure vs. HDPE pipe. CFT has conducted several pressure tests to understand how the increase in composite layers translate to an increase of working pressure.

About us

Composite Fluid Transfer (CFT) was established to pursue a solution for the industries related to fluid transfer via piping systems.

Our goal is to penetrate existing markets with a superior alternative to both the leak free fluid, slurry transfer systems and the conventional permanent water transfer installations. CFT can customize our products to meet your fluid transfer requirements.

The initial goal of CFT was to create the largest inside diameter pipe with a working pressure rating of 250 psi while keeping the weight low. We’ve far surpassed that now with ratings of 350 psi to 1000 psi.

The result, Fiberflex. FiberFlex is a cost-effective, patented, lighter weight pressure pipe. Our pipe can be installed with common fusion equipment at roughly half the installation time.
Composite Fluid Transfer built in Texas by Texans
Composite Fluid Transfer’s Fiberflex Technology is assembled in Kilgore, Texas ready to be shipped or transported to your location quickly.

CONNECT WITH US

FOLLOW US AS WE CHANGE THE FLUID TRANSFER INDUSTRY

FiberFlex is a cost-effective, patented, lighter weight pressure pipe.